Consolidated Companies Logo

S4S Boards


K.D. Solid Radiata Pine "C" and Better Selects Length as Available 6' - 16'
Production Description
1/2 X 8 1/2 X 7 1/4
1/2 X 10 1/2 X 9 1/4
1/2 x 12 1/2 x 11 1/4
1 X 4 3/4 x 3 1/2
1 x 6 3/4 x 5 1/2
1 x 8 3/4 x 5 1/2
1 x 8 3/4 x 7 1/4
1 x 10 3/4 x 9 1/4
1 x 12 3/4 x 11 1/4
5/4 x 6 1 1/8 x 5 1/2
5/4 x 8 1 1/8 x 7 1/2
5/4 x 10 1 1/8 x 9 1/4
5/4 x 12 1 1/8 x 11 1/4
Grading Rules*
C SELECT
Lumber of this grade is recommended for all finishing uses where fine appearance is essential. Because its appearance and usability ranks only slightly less than B & Btr. - 1 & 2 Clear, it is one of the most sought after products from the clear portion of the log. It is widely used for high quality interior trim and cabinet work with natural, stain or enamel finishes.

Characteristics and limiting provisions are:
Checks - Small, well scattered seasoning checks on the surface.
Skip - Light skip on one edge, one medium or two light skips on the back.
Stain - Medium stained wood in an occasional piece covering 1/3 the face, or a greater area of lighter stain when not in combinaition with other characteristics.
Torn or Raised Grain - Very light.
Wane - On reverse side 1/2 the thickness, 1/8 the width, 1/4 the length in an occasional piece.
Cup - Very light.
Twist - 7/4 and thinner, 1/2 of very light. 8/4 and thicker, 1/4 of very light.

Any one of the following characteristics:
Knots - Two small, sound, tight knots.
Pitch Streak - One small pitch streak.
Pockets - Two very small pockets.
Equivalent characteristics no more damaging than any of the above.

K.D. Finger-Joint and Primed S4S Pine Boards
Production(FJP) Description(S4S Boards)
1 x 4 3/4 x 3 1/2
1 x 6 3/4 x 5 1/2
1 x 8 3/4 x 7 1/4
1 x 10 3/4 x 9 1/4
1 x 12 3/4 x 11 1/4
5/4 x 4 1 1/8 x 3 1/2
5/4 x 6 1 1/8 x 5 1/2
5/4 x 8 1 1/8 x 7 1/4
5/4 x 10 1 1/8 x 9 1/4
5/4 x 12 1 1/8 x 11 1/4


* Lengths are 16' With Trims 6' & Longer
* All Boards Primed on 4 Sides
* Boards May Be Finger-Jointed and Edge-Glued

K.D. Solid Oak and Poplar S4S Boards -6' and Longer
Computer # Description PCS/BDLE
Oak 1 x 2 3/4 x 2" Full 6
Oak 1 x 3 3/4 x 3" Full 6
Pop/Oak 1 x 4 3/4 x 3 1/2" -
Pop/Oak 1 x 6 3/4 x 5 1/2" -
Pop/Oak 1 x 8 3/4 x 7 1/4" -
Oak 1 x 10 3/4 x 9 1/4" -
Pop/Oak 1 x 12 3/4 x 11 1/4" -
Oak 5/4 x 6 1 1/16 x 5 1/2" -
Oak 5/4 x 8 1 1/16 x 7 1/4" -
Oak 5/4 x 12 1 1/16 x 11 1/4" -
* 1 x 2 and 1 x 3 will be sold by the full bundle only.
GRADE: FAS - Boards will be "virtually" clear 1 face, hardwood lumber is graded on the worst face. FAS lumber is equivalent to 83.3% clear, therefore, the grade does allow for the face to have some defects.
These are approximate percentages of lengths we hope to maintain.
Lengths 4" 6" 8" 10" 12"
6' - 7' 15% 15% 15% 15% 15%
8' - 9' 35% 35% 35% 40% 35%
10' - 11' 25% 20% 25% 30% 25%
12' - 16' 25% 30% 25% 15% 25%
* Please note that any "creaming" of long lengths only will be subject to appreciable upcharges. These specified restrictions will be subject to availability of lengths. For larger lineal foot orders; special pricing available.

K.D. Solid Oak S4S Short Board Program
Computer # Description PCS/BDLE Length
Oak 1 x 23 3/4 x 2" Full 6 3'
Oak 1 x 24 4'
Oak 1 x 25 5'
Oak 1 x 26 6'
Oak 1 x 28 8'
Oak 1 x 33 3/4 x 3" Full 6 3'
Oak 1 x 34 4'
Oak 1 x 35 5'
Oak 1 x 36 6'
Oak 1 x 38 8'
Oak 1 x 43 3/4 x 3 1/2" 3'
Oak 1 x 44 4'
Oak 1 x 45 5'
Oak 1 x 46 6'
Oak 1 x 48 8'
Oak 1 x 63 3/4 x 5 1/2" 6 3'
Oak 1 x 64 4'
Oak 1 x 65 5'
Oak 1 x 66 6'
Oak 1 x 68 8'
Oak 1 x 83 3/4 x 7 1/4" 3'
Oak 1 x 84 4'
Oak 1 x 85 5'
Oak 1 x 86 6'
Oak 1 x 88 8'
Oak 1 x 103 3/4 x 9 1/4" Full 6 3'
Oak 1 x 104 4'
Oak 1 x 105 5'
Oak 1 x 106 6'
Oak 1 x 108 8'
Oak 1 x 123 3/4 x 11 1/4" 3'
Oak 1 x 124 4'
Oak 1 x 125 5'
Oak 1 x 126 6'
Oak 1 x 128 8'